Milestone Analytics 2.2 - Manual (Page 17)

Milestone XProtect Analytics 2.2; User’s Manual
www.milestonesys.com Page 17 Using the Time Synchronization …
Using the Time Synchronization Slider
The Time Synchronization slider is used for time-synchronizing images in the analytics image
capture position in the view’s top right position with the video displayed in the view’s top left
position.
Often there will be no need for synchronizing time between the two positions, but synchronization
may be required if you experience network latency. Network latency may cause the time stamps
for two positions' images to vary by a number of milliseconds; by moving the slider you are able to
compensate for this.
Move the slider—located in the view’s top right position—to the left to compensate by up to -2000
milliseconds; move the slider to the right to compensate by up to 2000 milliseconds.
Time synchronization slider; in this case used for compensating
by 20 milliseconds
To use your keyboard’s arrow keys to move the slider in convenient increments, first click the
slider, then press UP ARROW to reduce compensation by five milliseconds or DOWN ARROW to
increase compensation by five milliseconds.
Double-click the slider to reset compensation to 0 milliseconds.