Milestone Analytics 2.2 - Manual (Page 11)

Milestone XProtect Analytics 2.2; User’s Manual
www.milestonesys.com Page 11 Viewing Live …
Viewing Live Video & Analytics Data
The Smart Client lets you view real-time analytics data combined with matching live video.
Selecting an Analytics View
1. Go to the Smart Client’s Live tab.
2. In the Views section, select the required view.
View’s Structure
Data about relevant incidents will be displayed in the
view’s bottom area, live video will be displayed in
the view’s top left position, and an image from the
latest detected incident will be displayed in the
view’s top right position.
Each incident can be displayed with information in
the following columns:
 Alarm: Lists the type of incident detected,
for example motion or a license plate.
 Alert Type: Lists the category of incident.
 Confidence: Lists a value between 1 and
1000 describing the confidence level for the detection. Example: A value of 950 means that
the XProtect Analytics solution is at least 950/1000 certain that it has made a correct
detection. You will typically not see very low confidence values since it is possible to set a
minimum acceptable confidence level on the server.
 Description: Lists a summary of the detection.
 Device: Lists the camera by which the incident was detected.
 Location: Lists the location of the camera by which the incident was detected.
 Object: Lists the object detected.
 Object Type: Lists the category of object detected.
 Rule: Lists the XProtect Analytics rule triggered by the detection of the incident.
 Rule Type: Lists the category of XProtect Analytics rule triggered by the detection of the
incident.
 Source: Lists the surveillance system server hosting the camera by which the incident was
detected.