Kaman 8000 Enclosures User Manual

Page 42

Text mode
Original mode

Note: Pushing both the "SET" and "ENTER" button at the same

time always causes the indicator to recalibrate itself to the

given input and what is on the display at that moment.
As a protective measure, if scaling changes are made and
not terminated this way no recalibration will occur,
previous values will remain.

Note: As a further protective measure, the "SET" and "ENTER

buttons are not functional unless the PROCESS/SCALING
switch is in the SCALING position.

fig. 28 -- Button Function Legend;

Table 5 -- MCD-8000 Error Message Table;