FUTEK IHH300 (D530) Digital Display - Manual (Page 2)

l
Notes
Safety Warnings
!
!
!
!
!
!
!
!
Always wear safety glasses when operating this torque meter.
Always use the proper range transducer for the application. Over torque
may result in damage to the transducer or breakage resulting in personal
injury. Under torque may result in an incorrectly tightened fastener that
could loosen resulting in failure at a later date.
Do not use a transducer if it has been over-torqued.
Never apply torque in a situation where tool breakage may result in a fall or
slip resulting in personal injury. Pulling on the wrench, as opposed to
pushing on the wrench may help avoid this situation.
Always replace worn or rounded fasteners prior to applying torque.
Slippage may occur resulting in personal injury.
Never try to recharge a non rechargeable battery.
Never mount a transducer to a bench that is unstable or will tip when a
torque is applied.
Never use a torque transducer with an impact wrench.
1