Agilent Technologies Agilent B2201A - Manual (Page 190)

6-4 Agilent B2200 User’s Guide, Edition 4
VXIplug&play Driver
Installing VXIplug&play Driver
Installing VXIplug&play Driver
The installation flow is shown below. If you have already installed the GPIB
interface card, VISA I/O library, and programming software on your PC, skip steps
1 through 4.
1. Install the GPIB interface card into your PC.
See the interface card manual. Note the model number of the interface card, as
you may need it to configure the interface (in step 3).
2. Install VISA I/O library.
Follow the instructions in the I/O library’s setup program.
3. Configure and check the GPIB interface.
See the I/O library manual.
4. Install the programming software.
Follow the setup program instructions.
5. Install the VXIplug&play driver as shown below.
a. Insert the B2200 Software CD into the drive connected to your PC.
b. Execute the SETUP.EXE program stored on the disk. The program
automatically installs the following files in \Winnt\Agb220xa
folder. Execute echo %VXIPNPPATH% on the Command Prompt to know
.
• agb220xa.bas
• agb220xa.c
• agb220xa.def
• agb220xa.fp
• agb220xa.GID
• agb220xa.h
• agb220xa.hlp
• readme.txt
• DelsL1.isu