Route]:close:card, Route]:close[:list – Agilent Technologies Agilent B2201A User Manual
Page 161
Agilent B2200 User’s Guide, Edition 4
5-33
SCPI Command Reference
[:ROUTe]:CLOSe:CARD?
[:ROUTe]:CLOSe:CARD?
This query command returns channel_list of all closed (connected) channels for the
specified card.
Syntax
[:ROUTe]:CLOSe:CARD? card_number
Query response
channel_list
Example
OUTPUT @Agb2200;":ROUT:OPEN:CARD ALL"
OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"
OUTPUT @Agb2200;":ROUT:CLOS:CARD? 1"
ENTER @Agb2200;A$
A$ will be @10101,10202. For channel_list, see “Switch Control” on page 4-5.
[:ROUTe]:CLOSe[:LIST]
This command connects the input ports to the output ports (channels) as specified in
channel_list. The query returns 0 or 1 for each channel specified by channel_list, in
same order as specified by channel_list.
For some modes (such as Single Route Mode, Couple Mode, Ground Mode, and
Bias Mode), more complex connections may occur.
Syntax
[:ROUTe]:CLOSe[:LIST] (@channel_list)
[:ROUTe]:CLOSe[:LIST]? (@channel_list)
Query response
close_status{, close_status}
1: closed
0: opened
Parameter Explanation
card_number
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Parameter Explanation
channel_list
Channels to close or to check.
For channel_list, see “Switch Control” on page 4-5.