Agilent Technologies Agilent B2201A - Manual (Page 169)

Agilent B2200 User’s Guide, Edition 4 5-41
SCPI Command Reference
:SYSTem:BEEP
[:ROUTe]:SYMBol:PORT? port_number
Query response symbol_string <^END>
Example OUTPUT @Agb2200;":ROUT:SYMB:PORT 1,'SMU1'"
OUTPUT @Agb2200;":ROUT:SYMB:PORT? 1"
ENTER @Agb2200;A$
This example assigns the string SMU1 to the input port 1. After that, SMU1 is used
instead of 01. In this example, A$ will be SMU1.
:SYSTem:BEEP
This command enables/disables the beeper.
Syntax :SYSTem:BEEP state
Example OUTPUT @Agb2200;":SYST:BEEP ON"
:SYSTem:CCONfig?
This query command is just to keep compatibility with the Agilent E5250A Low
Leakage Switch Mainframe. This query command returns the card configuration
information.
Parameter Explanation
port_number Input port number: 1 to 14.
symbol_string Symbol string set to the specified input port. Maximum 6
characters.
Numeric characters, alphabetic characters; upper case and
lower case, space, and the following symbols are available.
! " # $ % & ’ ( ) * + , - . / > ? : ~ ; < = > ? @ [ \ ] ‘ { | } ^ _
Parameter Explanation
state ON or 1: enables the beeper
OFF or 0: disables the beeper