Agilent Technologies Agilent B2201A - Manual (Page 176)

5-48 Agilent B2200 User’s Guide, Edition 4
SCPI Command Reference
:SYSTem:MEMOry:LOAD
:SYSTem:MEMOry:LOAD
This command restores the B2200 setup information specified by memory_number.
It must be already saved by “:SYSTem:MEMOry:SAVE”.
Syntax :SYSTem:MEMOry:LOAD memory_number
Example OUTPUT @Agb2200;":SYST:MEMO:SAVE 1"
OUTPUT @Agb2200;":SYST:MEMO:LOAD 1"
:SYSTem:MEMOry:SAVE
This command saves the present setup information of the B2200 into the internal
memory specified by memory_number. The previous setup will be deleted. To
memorize the comment for the setup information, use
“:SYSTem:MEMOry:COMMent”.
The following setup information will be saved.
• Configuration mode
• Connection rule, connection sequence
• Bias mode status, bias ports, bias-enabled channels
• Couple mode status, couple ports
• Ground mode status, ground ports, ground-enabled channels, ground-enabled
ports
• Connection status of all switches
• Symbol string of all input ports and output ports
Syntax :SYSTem:MEMOry:SAVE memory_number
Example OUTPUT @Agb2200;":SYST:MEMO:SAVE 1"
Parameter Explanation
memory_number memory number: 1 to 8.
Parameter Explanation
memory_number memory number: 1 to 8.