Blue-White F-2000 – Solvent Weld PVC Tee Fitting - Manual (Page 9)

F-2000 Page 9
Step 3 Enter the High Alarm Release Value or 0.
Step 4 Enter the Low Alarm Trigger Value or 0.
Step 5 Enter the Low Alarm Release Value or 0.
Step 6 Enter the Alarm Reset Delay Timer in seconds or press
to bypass this screen.
The alarm will be silenced (relay de-energized) for the programmed amount of time when is pressed.
After the delay time, if the alarm condition still exists, the relay will re-energize. This feature allows the user to
temporarily silence the alarm without disabling the alarm feature. The programmed time range is from 0 to 999
seconds.
Step 7 Press and hold down for at least 1.25 seconds to exit.
! Press to select the digit or decimal point to be changed. The selected digit will blink.
! Press to change the selected digit. Note: This value must not be greater than the High Alarm Trigger Value.
! Press when you have entered your desired High Alarm Release Value.
! Press to select the digit or decimal point to be changed. The selected digit will blink.
! Press to change the selected digit. Note: Setting the value to zero disables the Low Alarm.
! Press when you have entered your desired Low Alarm Trigger Value.
! Press to select the digit or decimal point to be changed. The selected digit will blink.
! Press to change the selected digit. Note: This value must not be less than the Low Alarm Trigger Value.
! Press when you have entered your desired Low Alarm Release Value.
! Press to select the digit to be changed.
! Press to change the selected digit. Note: Setting the value to zero disables the Alarm Reset Delay Timer.
! Press to save your Alarm Reset Delay Time.
CLEAR
SETPOINT
TOTAL
CLEAR
ENTER
CLEAR
SETPOINT
TOTAL
CLEAR
ENTER
CLEAR
SETPOINT
TOTAL
CLEAR
ENTER
RATE SETPOINT
00000 2
RATE SETPOINT
00000 3
RATE SETPOINT
00000 4
RATE SETPOINT
000 5
ENTER
CLEAR
SETPOINT
CLEAR
SETPOINT
TOTAL
CLEAR
ENTER
ENTER