Badger Meter SRD/SRI Valve Positioners - Manual (Page 12)

Electromagnetic
Compatibility EMC
Operating conditions industrial environment
Immunity according to EN 61326 fulfilled
IEC 61326 fulfilled
EN 61000-6-2 fulfilled
Emission according to EN 61326 Class A and Class B fulfilled
EN 61000-6-4
fulfilled
EN 55011 Group 1, Class A
and Class B
fulfilled
NAMUR recommendation EMV NE21 fulfilled
SAFETY REQUIREMENTS
CE label Electromagnetic compatibility 4) 2004/108/EC
Low-voltage regulation not applicable
Safety According to EN 61010-1 (or IEC 1010-1) Safety class III Overvoltage Category I
Internal fuses only with PROFIBUS or FOUNDATION
Fieldbus, but not replaceable
External fuses Limitation of power supplies for fire
protection must be observed acc to EN
61010-1, appendix F (bzw IEC 1010-1)
1) Details see Certificates of Conformity With Option -T only –20° C
2) Below –20 °C the LCD reacts only slowly; above 70° C the background becomes dark
3) Under service as directed
4) With PROFIBUS or FOUNDATION Fieldbus only, if shield of wiring is grounded on both sides
5) Pneumatic connection 1/4-18NPT made with a seperate manifold delivered together with the device
Safety Requirements
Page 12 August 2014 POS-UM-00223-EN-02