Airedale OnRak 3kW 35kW - Manual (Page 4)

LogiCool
™ OnRak
Active Cabinet Exhaust
IT Cooling
4
IT Cooling
Technical, Installation and Maintenance Manual :6912497 V1.5.0 02_2013
Health and Safety
IMPORTANT The information contained in this manual is critical to the correct operation and
maintenance of the unit and should be read by all persons responsible for the installation,
commissioning and maintenance of this Airedale unit.
The equipment has been designed and manufactured to meet international safety
standards but, like any mechanical/electrical equipment, care must be taken if you are to
obtain the best results.
CAUTION Installation, service and maintenance of Airedale equipment should only be carried out by
technically trained competent personnel.
CAUTION When working with any air conditioning units ensure that the electrical isolator is switched
off prior to servicing or repair work and that there is no power to any part of the
equipment.
Also ensure that there are no other power feeds to the unit such as fire alarm circuits,
BMS circuits etc.
Electrical installation commissioning and maintenance work on this equipment should be
undertaken by competent and trained personnel in accordance with local relevant
standards and codes of practice.
Personal Protective
Equipment Airedale recommends that Personal Protective Equipment is used whilst installing,
maintaining and commissioning equipment.
Electrical Bonding It is important that the components attached to the server rack are electrically bonded to
earth correctly.
It is recommended that a mechanical earth strap is used at the following locations

Doors

Mating Flange

LogiCool OnRak

LogiCool OnRak Chilled Water Coil

Dual Power Supplies