beautypg.com

Introduction, 1 before you begin, 2 intended use – Thermo Fisher Scientific Alpha DO 2000 User Manual

Page 9: Before you begin, Intended use

background image

Instruction manual

Alpha DO 2000

1. Introduction

1.1 Before You Begin

We thank you for purchasing the Alpha DO 2000.

The construction of the Alpha DO 2000 employs leading edge technology
and complies with safety regulations currently in force. Notwithstanding this,
improper use could lead to hazards for the user or a third-party, and/or
adverse effects on the plant or other equipment. Therefore, the operating
instructions must be read and understood by the persons involved
before work is started with the Alpha DO 2000.

Thermo Scientific do not accept any liability for damage that may arise
from neglecting information given in this manual.

This instruction manual identifies safety instructions and additional
information by means of the following symbols:

This symbol draws attention to safety instructions and warnings of
potential danger which, if neglected, could result in injury to persons
and/or damage to property.

This symbol identifies additional information and instructions which, if
neglected, could lead to inefficient operation and possible loss of
production.

The instruction manual must always be stored close at hand, in a place
accessible to all people working with the Alpha DO 2000.

If you have questions, which are not or insufficiently answered in this
instruction manual, please contact your supplier. They will be glad to assist
you.

1.2 Intended Use

The Alpha DO 2000 is intended solely for dissolved oxygen and temperature
measurement, as described in this instruction manual.

Any other use, or use not mentioned here, that is incompatible with the
technical specifications is deemed inappropriate. The operator is solely
responsible for any damage arising from such use.

Other prerequisites for appropriate use include:

− Comply with the instructions, notes and requirements set out in this

instruction manual.

− Comply with all local safety regulations concerning safety at work.
− Comply with all information and warnings in the documentation dealing

with the products used together with the transmitter (housings, sensors,
etc.).

− Comply with the prescribed environmental and operational conditions.

1