Thermo Fisher Scientific CyberScan pH 1500 - Manual (Page 47)

Instruction Manual CyberScan pH1500
45
std
print
enter
9 PRINT DATA
9.1 Printing Data
Depending on the print option in the meter setup, pressing print key
allows you to print either current displayed reading or stored data
from meter to a PC or printing device via a RS232 communication
cable. Ensure that both meter and peripheral have the same
configuration in terms of baud rate, parity bit and stop bit. Please
check with the printer’s or peripheral’s manufacturers for details of
any specific settings of the device in use.
If there is an error message during operation, the screen displays
Err1 as shown below. This indicates a communication error due to
incorrect baud rate, parity or stop bit being selected. Press std key to
return to the Measure mode.