beautypg.com

Thermo Fisher Scientific CyberScan pH 1500 User Manual

Page 39

background image

Instruction Manual

CyberScan pH1500

37

f. Repeat the above step c through e for the second and subsequent

calibration points. Meter automatically returns to the Measure mode
after the last 5

th

calibration point has been performed. In the pH

Measure mode, the screen shows all the buffer values being
standardized. An error message Err2 will be displayed if there is more
than 6 points pH standardization being performed.

Note:
If the “EURO” buffer is selected, meter returns to measurement mode
automatically after 6

th

point calibration.