Thermo Fisher Scientific CyberScan pH 1500 - Manual (Page 23)

Instruction Manual CyberScan pH1500
21
print
enter
std
4.1.6 P6.0 Stability Indicator
This setup option allows you to set the stability indicator to be
displayed on the screen whenever reading has stabilized, thus
minimizes guesswork.
To Set Stability Indicator
1. Access the Set Stability Indicator menu from any Measure screen
by pressing the setup key.
2. Use the ▲ or ▼ key to scroll until the screen displays the stable
icon is shown.
save view
STABLE
press to set value
press to accept enter
3. Press enter key to make selection and use the ▲ or ▼ key to toggle
between NO or YES. Select YES to display stable icon to be shown
whenever readings stabilize or NO if no indicator is needed.
4. Press
enter key to confirm selection OR press std to exit from this
page.
5. Continue to access other setup menu using ▲ or ▼ keys OR press
std key to exit from the setup and return to Measure mode.