Thermo Fisher Scientific CyberScan pH 1500 - Manual (Page 33)

Instruction Manual CyberScan pH1500
31
std
print
enter
4.1.12 P12.0 Clear Buffer Values
This setup option allows you to clear the standardized buffer values.
To Clear Buffer Values
1. Access the Clear Buffer Values menu from the pH Measure
screen by pressing the setup key.
2. Use the ▲ or ▼ key to scroll until the screen displays the clear
BUFFER icon along with the previously buffer values being
standardized.
save view
press to set value
press to accept enter
clear
BUFFER
3. Press enter key to make selection and use the ▲ or ▼ key to
toggle between NO or YES. Select YES to clear all the existing
buffer values or NO if no change is to be made.
4. Press enter key to confirm selection OR press std to exit from
this page.
5. Continue to access other setup menu using ▲ or ▼ keys OR
press std key to exit from the setup and return to Measure mode.