Thermo Fisher Scientific CyberScan pH 1500 - Manual (Page 31)

Instruction Manual CyberScan pH1500
29
4.1.11 P11.0 Clear Stored Data
This setup option allows you to clear all stored data sets (from
previous measurements) in the meter’s memory for new data to be
stored. Note old data sets will be overwritten by any new data sets in
the event when the stored locations have exceeded.
To Clear Stored Data
1. Access the Clear Stored Data menu from any Measure screen by
pressing the setup key.
2. Use
the ▲ or ▼ key to scroll until the screen displays as shown.
save view
press to set value
press to accept enter
Print
press to set value
press to accept enter
Data
clear