SHIMPO DT-900 - Manual (Page 8)

5
Do not store instrument on the following places
•
Explosive or combustible areas
•
Near water, oil, dust and chemicals.
•
Areas where temperature is above 104 degrees Fahrenheit (40 degrees Centigrade)
Do not disassemble or repair unit while in operation.
Stroboscopes are used in various applications such as quality machine inspection and timing. At high-
speed or high frequency operation the human eye can not discern a single image of a moving object.
Stroboscopes are used to freeze these images by matching the speed of the moving object with short
duration flashes. An indicator or reference point such as a small tape or paint mark can be visually rotated
in any direction depending on the phase angle and flash rate it is subjected into.
The Shimpo DT-900 Techstrobe has many of the same capabilities as our DT-300 and DT-700 series
stroboscopes, without the size; these capabilities are incorporated in this unit so as to enjoy these features
with the mere touch of a button.
Check diagram of the parts overview to gain familiarity with this strobe.
STROBOSCOPE OVERVIEW