SHIMPO DT-900 - Manual (Page 5)

2
For Safety and proper operation, please read this manual carefully. For additional information please call
Shimpo Instruments at (800) 842-1479.
•
Failure to operate this equipment correctly could result in malfunction or accidents.
•
Be sure to operate this stroboscope as described in this manual.
•
Keep this manual handy so as to be ready for use when necessary.
•
If the stroboscope fails to operate, review the operational procedure and troubleshooting section. If
this fails to remedy the problem, contact your nearest dealer.
•
DT-900 handheld stroboscope operates at HIGH VOLTAGE inside the lamp and the electronic
compartment. Please disconnect battery prior to lamp replacement.
• Direct view of the lamp may trigger epileptic seizure
•
Eye damage may result in improper use of the lamp, please use best judgement in using this
equipment.
•
Damage due to the use of other AC adapter beside the one provided will void the warranty. Kindly
make sure that your AC adapter is Shimpo approved.
•
Remove battery pack prior to recharging. Do not use the adapter as an external source for the
techstrobe.
•
It is recommended that the battery be charged when the “Low Batt” indicator flashes on display. This
is to prolong the life of your battery.
WARNING READ CAREFULLY BEFORE OPERATING UNIT.