Revo RESPTZ37-1/HSC/HSW User Manual - Manual (Page 8)

REVO America www.revoamerica.com RESPTZ37-SERIES
6
S S e e t t t t i i n n g g s s
Prior to installing the camera, you must set it up for use in the video system. To do this you will
need to access the switches on the bottom of the camera. Remove the camera from the box and
the enclosure. To access the switches, you must remove the bottom cover as shown in Figure 1.
TIP
Use a small paper clip to set the DIP switches to ensure that you set each one correctly.
Figure 1. Removing Bottom Cover
NOTE
Setting DIP switches correctly is very important. If you do not set them correctly, there
will be communication errors.