Revo RESPTZ37-1/HSC/HSW User Manual - Manual (Page 24)

REVO America www.revoamerica.com RESPTZ37-SERIES
22
FOCUS SETUP
MODE : AUTO
FOCUS LIMIT : 50 CM
SAVE AND EXIT(ESC TO CANCEL)
MODE: AUTO/MANUAL/ONE PUSH/CONSTANT MANUAL
AUTO: Lens in autofocus mode. The lens motor will automatically move
the lens to find the best focal point.
MANUAL: Lens is focused manually. For normal use, manual mode
should be used.
ONE PUSH: I n certain situations, the lens may not be able to find a focal
point. This will cause the lens motor to continuously move. Using One
Push Focus will choose a point to focus on and lock into that point.
CONSTANT MANUAL: Sets the focal point to where the camera was set,
by the user, to focus and stay there. With manual focus the image that
is being focused on can become out of focus due to wind or other
factors. Using Constant Manual will adjust the focus for these minor
changes by keeping the desired image in focus.
FOCUS LIMIT: This sets an approximate value that the camera will remain in focus from
the setting value. The options are: 50 cm, 1.8 m, 3.0 m, 6.0 m.
CAUTION
Avoid continuous use of the Auto Focus mode. It will shorten the life of the lens.
Use Manual mode as default.
WB CONTROL The White Balance WB setup submenu provides control to adjust the color
hue (red and blue) gain for a camera so that true white appears white in the
image. It is normally compensated for by the automatic gain control (AGC). In