Metex Shark Multi-Parameter Controllers & Analyzers - Manual (Page 6)

Section 2 - Installation Page 4
S H A R K
MULTI-PARAMETER CONTROLLER & ANALYZER USER’S MANUAL
Section 2 - Installation
Panel Mount – The Shark can be
panel mounted to a panel using the
hardware kit provided. The panel
cutout dimensions are shown in fig.
2.1.
Pipe Mount – The Shark
can also be mounted to a
horizontal or vertical pipe
with:
• a minimum outside
diameter of 1.30” (33mm)
(for example 1” CPVC
pipe)
• and a maximum of
2.375” (60mm) (for
example 2” CPVC pipe)
MIN. PIPE DIA.
1" PIPE (NOMINAL)
MAX. PIPE DIA.
2" PIPE (NOMINAL)
NUT
10-24
QTY.4
SCREW
10-24 X 3-1/2"
QTY.4
UNIVERSAL MOUNTING
BRACKET
QTY.1
Fig. 2.3 Vertical Pipe Mount
SCREW
1/4-20 X 6"
QTY.4
UNIVERSAL MOUNTING
BRACKET
QTY.1
PANEL
(CUSTOMER SUPPLIED)
EXTERNAL PANEL
GASKET QTY.1
UNIVERSAL
MOUNTING
CLAMP QTY.2
NUT
1/4-20
QTY.4
SCREW
10-24 X 1/2"
QTY.4
Figure 2.2 Panel Mount
Dwg# N105-100
Dwg# N105-100