Martel Electronics BetaLOG-PI - Manual (Page 10)

2) Display number of free log records
• Main display: number of free records
• Secondary display: FREE
• the ▼ and ▲ keys are ignored.
• press the CONFIG key to step to the next menu item if not
logging, otherwise it exits configuration.
• press the ENTER key to exit configuration.
3) Select logging interval
• Main display: interval choice presently selected, one of 1, 2, 5,
10, 30 for seconds, or 1, 2, 5, 10, 30 for minutes, or 1 for hours.
• Secondary display: time unit SEC, MIN, or HOUR as appropriate
for the choice presently selected
• press the ▼ key to decrease the interval selection, stopping at 1
second.
• press the ▲ key to increase the interval selection, stopping at 1
hour.
• press the CONFIG key to step to the next menu item.
• press the ENTER key to exit configuration.
4) Select maximum number of samples
• Main display: number of samples presently selected
• Secondary display: SAMPL
• press the ▼ key to decrease the number, stopping at 1.
• press the ▲ key to increase the number, stopping at the
maximum number of records 8500.
• press the CONFIG key to step to the next menu item.
• press the ENTER key to exit configuration.
5) Erase all logged data and set to Demand mode
• Main display: CLEAr
• Secondary display: DATA
• the ▼ and ▲ keys are ignored.
• press the ENTER key to step to the next menu item and confirm
erasure.
• press the CONFIG to exit configuration without erasing the data.
8