Martel Electronics BetaLOG-TI - Manual (Page 7)

BetaLOG TI
User Manual
Revision 1.00, October 22, 2010
Page 7 of 16
Upload Data Upload all data logging runs from the probe and show
them on the Log Upload Display described in section
4.4. The data may be exported from that display.
See the Uploading Logged Data description in the
Main Display section 4.3.
Clear Data Erase all data logging runs from the probe. See the
Clearing Logged Data description in the Main Display
section 4.3.
Send Setup Send the setup data to the probe. See the Sending
Setup Configuration description in the Main Display
section 4.3.
Retrieve Setup Retrieve the setup data from the probe. See the
Retrieving Setup Configuration description in the Main
Display section 4.3.
4.2.3 Options Menu
The Options Menu contains functions for specifying the default display and
export options. These functions are described in detail in sections 4.5 and
4.6 below.
4.2.4 Help Menu
The Help Menu contains the functions required to obtain help and support
information:
Help Display online help
Support Display customer support information.
Registration Register BetaLOG TI and display registration
information
About Display application description and version
information.