Martel Electronics BetaLOG-TI - Manual (Page 5)

BetaLOG TI
User Manual
Revision 1.00, October 22, 2010
Page 5 of 16
• Secondary display: DATA
• If presently logging data, the ENTER key is ignored.
• If not presently logging data, press the ENTER key to
change to data edit mode:
- Press the
▼ or ▲ key to toggle the secondary
display between CNFRM and CANCL.
- Press the ENTER key when CANCL is displayed
to exit data edit mode without sending the data.
- Press the ENTER key when CNFRM is displayed
to exit data edit mode and send the data. While
the data is being sent, BUSY is shown in the
secondary display.
• Press the SETUP key to step to the next menu item.
• Press the MAX/MIN key to exit the SETUP menus and return
to the main display.
5) Erase logged data
• Main display: ErASE
• Secondary display: DATA
• If presently logging data, the ENTER key is ignored.
• If not presently logging data, press the ENTER key to
change to data edit mode:
- Press the
▼ or ▲ key to toggle the secondary
display between CNFRM and CANCL.
- Press the ENTER key when CANCL is displayed
to exit data edit mode without erasing the data.
- Press the ENTER key when CNFRM is displayed
to erase the data and exit data edit mode.
• Press the SETUP key or the MAX/MIN key to exit the
SETUP menus and return to the main display.
While not logging data, the probe operates as described in the user
manual received with the probe.
When a log run is started, the text LOG, the text RUN, and the run number
are cycled on the secondary display at a rate of once per second. This
provides visual feedback that data logging is active and the run number for
later reference.
4. BetaLOG TI Microsoft Windows Application
This application provides the following features:
• set up the data logging configuration in a probe
• upload logged data from the probe, including export of run
data to text, CSV, and Excel format files
• clear logged data from the probe