Martel Electronics BetaLOG-TI - Manual (Page 10)

BetaLOG TI
User Manual
Revision 1.00, October 22, 2010
Page 10 of 16
4.4 Log Upload Display
The top portion of the display lists the individual data logging runs found in
the uploaded data. To display a run's data in the lower portion of the
display, highlight it by clicking on it.
Use the Display Mode box to select the subset of run data displayed: All
Data, Selected Data, or Readings Only. When the Display Mode is set to
Selected Data, click the Change Selection button to modify the display
options. This is described further under Display Options in section 4.5.
The probe has no calendar hardware so the uploaded data samples are
initially tagged by elapsed day and time from run start. Also the runs are
described simply by numeric position within the uploaded data. To enter a
more descriptive label and a true calendar base date and time for a run,
highlight the run and click the Set Date/Label button. The base date and
time are added to the elapsed day and time for each sample to provide a
true calendar date and time for each sample.
To export an individual run, highlight the run and click the Save Run
button. The Export Options screen is shown to allow the options to be
customized for exporting this run. Next, a standard Save As screen is