Martel Electronics BetaLOG-TI - Manual (Page 15)

BetaLOG TI
User Manual
Revision 1.00, October 22, 2010
Page 15 of 16
BetaLOG-TI-template-single-run-one-value-graph.xlt
The Export options that must be set for this template are as follows:
Field Include
Field Insert
Description Excel
Cell
Run # or Label Yes No B3
Probe Description Yes No B5
Interval Time Yes No B9
Unit Yes No B7
Readings Yes No B24
5.2 Single Run Graph for All Data Upload
This template provides custom titles and a graph of the merged data for a
single run. It lists the interval end, minimum, maximum, and average
values for all sample points. It graphs the interval end values for all
sample points. It assumes that a base date is entered for the run. The
graph vertical axis is scaled to the range of the uploaded temperature
values and the horizontal axis is scaled to the number of samples
uploaded.
The template file name is:
BetaLOG-TI-template-single-run-four-values-graph.xlt
The Export options that must be set for this template are as follows:
Field Include
Field Insert
Description Excel
Cell
Run # or Label Yes No B3
Probe Description Yes No B5
Interval Time Yes No B9
Unit Yes No B7
Readings Yes No B24
6. Warranty
The media on which you receive this software is warranted not to fail, due
to defects in materials or workmanship, for a period of 90 days from date
of shipment. Martel Electronics Corporation will, at its option, repair or
replace the media upon notice of such failure. Martel Electronics
Corporation does not warrant that the operation of the software shall be