KYORITSU 1062 - Manual (Page 9)

67
3. Specifications
3.1 General Specifications
Measurement function:
DC Voltage, AC Voltage, DC Current, AC Current, Resistance,
Frequency, Temperature, Capacitor, Duty cycle ratio,
Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω*
Other functions: Data Hold (D•H), Auto Hold (A•H), Peak Hold* (P•H),
Range Hold (R•H), Maximum value (MAX), Minimum value (MIN),
Average value (AVG), Zero Adjustment (Capacitor, Resistance),
Relative values, Save to Memory, LCD backlight.
LowPower-Ω: Measures resistance under lowmeasurement current.
*: For model KEW1062 only
Measuring method: Σ modulation
Display: 5-digit (LCD)/7-segment
Maximum Reading: 50000
Polarity Indicator: “–” Appears automatically when the polarity is
negative
Overrange Indicator: “ OL ”
Low-battery Indicator: “ ” Appears when the batteries become
low
Measurement cycle: 6 times per second
(except frequency measurement: one times per second, Resistance
measurement : four times per second, capacitor measurement (50mF):
max. 0.03 time per second)
Bar graph display 15 times per second
Operating temperature and humidity ranges:
-20 to 55ºC, 80%RH or less (no condensation)
70%RH or less at 40 to 55ºC.
Storage temperature and humidity ranges:
-40 to 70ºC, 70%RH or less (no condensation)
Temperature coefficient:
(Accuracy at 23±5ºC) × 0.05/ºC or less
At -20 to 18ºC and 28 to 55ºC
When continuously DCV and DCA measuring, add 1digit / ºC
(except for 50mV, 5A, 10A range, add 3digits / ºC).
Power supply: AA-size (R6) 1.5V batteries: 4