KYORITSU 1062 - Manual (Page 46)

104
Set the sub-display during LOGGING mode.
(The numbers of saved data or time (minute : second))
Default is the numbers of saved data.
1) Pressing the LIGHT key shows “LG. Unt” on the display.
HOLD
： No.
： CLOCK
2) Select the desired setting by using the ▲ (RANGE) key or ▼ (REL) key.
3) Press the HOLD key to save the setting.
“SEt” appears and then “LG. Unt.”
Set the sound on/off (beep of buzzer)
Even if the user sets the sound off, it goes off at the following points.
• checking continuity
• alarm for over-input
• alarm for auto power-off
1) Pressing the LIGHT key shows “bEEP” on the display.
Set on/off on the sub-display. Default is ON.
HOLD
: ON
: OFF
2) Select on/off by using the ▲ (RANGE) key or ▼ (REL) key.
3) Press the HOLD key to save the setting.
“SEt” appears and then “bEEP.”
Reset all the settings to factory preset mode except for time.
1) Pressing the LIGHT key shows “dEF.” on the display.
HOLD
2) Press the HOLD key to reset the settings.
“donE” appears and then “dEF.”