KYORITSU 1062 - Manual (Page 45)

103
Set a default value of the reference resistance during dBm measurement mode.
1) Display “db-r” by using the LIGHT key.
The reference value appears on the display.
HOLD
2) Select the reference resistance by using the ▲ (RANGE) key or ▼ (REL) key.
3) Press the HOLD key to save the setting.
“SEt” appears and then “db-r.”
Setting values of reference resistance
4, 8, 16, 32, 50, 75, 93, 110, 125, 135, 150, 200, 250, 300, 500, 600, 800, 900, 1000,
1200Ω(default value is 600Ω)
(KEW1062 only)
Set a default setting of detection methods during AC measurement.
RMS or MEAN: The default setting is RMS.
1) Display “Ac” by using the LIGHT key.
HOLD
： RMS
： MEAN
2) Select the detection method by using the ▲ (RANGE) key or ▼ (REL) key.
3) Press the HOLD key to save the setting.
4) “SEt” appears and then “Ac.”
Set a default value of the saving interval during LOGGING mode.
1) Display “LG. int” by using the LIGHT key.
The default setting is 1 sec.
HOLD
2) Select the saving interval by using the ▲ (RANGE) key or ▼ (REL) key.
3) Press the HOLD key to save the setting. “SEt” appears and then “LG. int.”
Settings of saving interval
1, 2, 5, 10, 30, 60, 600, 1800 sec