KROHNE GFM 700 EN - Manual (Page 27)

27
4. The power fuses F1 and F2 (see Figure 7 below) can be replaced now. The 24 VAC/DC power supply uses
two sub-miniature fuses of T1.25A in accordance with IEC 127-3.
5. Reassemble in reverse order (points 3 through 1).
Note the instructions of section 2.3 ("After opening") during reassembling.
Figure 7: GFC 700 electronics unit with 24 VAC/DC power supply.
Figure 8: Location of fuses F1, F2 on 24 VAC/DC unit.
Location of power fuses
(see detail in Figure 8)
F2 F1