KROHNE IFC 110 Converter EN User Manual
Page 25
05/2003
IFC 110 F
25
4.2
Operating and control elements
The instrument can be operated
by means of ....
… the 15 keys
~
and
accessible
after removal of the glass cover,
… the 3 magnetic sensors
and the
bar magnet without opening the
housing
(optional).
{
Display, 1st line
Displaying numerical data
|
Display, 2nd line
Displaying units and texts
}
Display, 3rd line
6 arrows to mark the current display
flow rate
current flow rate
totalizer
+
totalizer
-
totalizer
Σ
sum totalizer (+ and -)
control in
1/2
control input 1 or 2 active
~
5 keys for operating the signal converter
← → ↵ ↑ ↓
10 keys for direct numerical setting of function values (not function numbers)
Compass field showing that a key is pressed
magnet active
LED green/red, magnetic sensors active
green = built-in magnetic sensors (optional), see
red
= operation of one of the 3 magnetic sensors
3 magnetic sensors (optional), operated by bar magnet without opening the housing,
function of the sensors as described for the three keys
→ ↵ ↑, see
~
.
diagnostics
2 LEDs signalling the status of measurement
normal
green LED = correct measurement, everything O.K.
error
red LED
= error, parameter or hardware error
IMoCom
IMoCom bus, multipoint connector for connecting external
supplementary equipment, see Section 6.4, slide window to the left