KROHNE BM 26 A EN - Manual (Page 8)

8 Installation and Operating Instructions BM 26 A
1 Installation
1.1 Packing and storage
Floats packed separately
1
To install, remove the bottom flange and insert the float – the right way up – into the guide
chamber.
2 Align gaskets.
3 Tighten nuts using the correct torque with regards to the strength of bolts specified for the
vessel pressure rating, connecting flange and material.
CAUTION
Make sure that the guide tube is free of foreign bodies
(dirt, loose objects, etc.).
Floats held in position during transit by a plastic locking clip
This should be removed from the guide tube before installation through the bottom connection
flange. Follow the procedure below:
Step 1
Check measuring tube for a red sticker next to the bottom process connection.
ATTENTION!
Retirer la tige de sécurité
maintenant le flotteur
ATTENTION !
Take away transport safety
device for float
ACHTUNG !
Transportsicherung für
Schwimmer entfernen