KROHNE BM 26 A EN - Manual (Page 39)

Installation and Operating Instructions BM 26 A 39
Connecting flanges
to DIN 2501:
Standard DN 25, PN 40 Form B1 (EN 1092-1)
Option DN 15 to DN 50, PN 16 or PN 40
to ASME B 16.5: ½” to 2”, ASME150LB/RF or 300LB/RF
for the heating jacket
Connecting tube (standard) For Ermeto 12 screw joint
to DIN 2501 DN 15, PN 40
to ASME B 16.5 ½”, 150LB/RF or 300LB/RF
Pipe 12 x 1 mm (0.47” x 0.04”)
Information on other standards and pressure ratings supplied on request
Materials (BM 26 A without options)
Stainless steel 316 L or Ti
Level transducer (reed chain) current output 4 … 20 mA
current output 4 … 20 mA + HART
output PROFIBUS PA/FF
see section 7.2 for technical data on
transmitter module options