KROHNE BM 26 A EN - Manual (Page 37)

Installation and Operating Instructions BM 26 A 37
5 Maintenance
The instrument will not normally require any maintenance. However, flushing the instrument is
recommended from time to time if the tank product is contaminated or has a tendency to form
deposits. In order to do this, open the drain plug or drain valve and flush out. If the float also requires
cleaning, remove it from the bottom of the measuring tube after first closing off the shut-off
elements.
WARNING
Follow accident prevention regulations carefully when working with pressurized tanks
and dangerous chemical products
6 Ordering spare parts
The following details are required for ordering spares:
1. Commission number of the level gauge (see instrument nameplate)
2.
Instrument type, model, description, nominal size of process connections (DN)
3. Construction materials
Note: Please specify flange spacing (measuring range ie. the distance between the process
connections axes) or the KROHNE Comm. No. from the initial order.