KROHNE VFM 1091 User Manual

Page 15

Using keys in programming mode

Key Main menu level

Submenu

Data level

Function

level

Option/Units

Numerical values / strings

Select main menu

Select submenu or function

select next

Change flashing digit or

Proposal Character Proposal

Enter displayed

Enter displayed submenu

Shift flashing digit or

Main menu

(execute) function

character position

Quit programming

Return to main menu

Select displayed

Enter the displayed numerical

Mode and go back

or submenu

proposal and return

value or alphanumerical

To measurement

to function level if no

string. Then return to

Mode

further data entry is

function level if no further

required by the

required by that function

function

Newly entered data will be saved in non-volatile memory and accepted by measuring program only after termination of programming mode as

described below.

Pressing the key at main menu level quits the programming mode. Before exiting programming mode, device updates the configuration

according to the changes done in the menu.

Programming using HART

based communicator

While in the measuring mode the communicator displays the measured values of flow, the computed current output value and Qmax, Qmin

values programmed into the device. Using the communicator, you can see / modify many of the device parameters. For details of using HART

Communicator please refer the HART

Communicator manual. The Generic Online Menu of the communicator is given in 6.2.14 for your quick

reference. Please refer 6.2.12 for details of HART

programmability.