beautypg.com

Technical data – KROHNE OPTITEMP TT 30 C-R EN User Manual

Page 40

background image

7

TECHNICAL DATA

40

OPTITEMP TT 30 C/R

www.krohne.com

11/2012 - 4000753302 - MA OPTITEMP TT 30 C/R R02 en

Input impedance

>10 MΩ

Maximum wire loop resistance

500 Ω (total loop)

Cold Junction Compensation

(CJC)

Internal or none (0°C)

Input - voltage

Input - voltage

Input - voltage

Input - voltage

Range

-10...+500 mV

Minimum span

2 mV

Customized linearization

Up to 9 points

Input impedance

>10 MΩ

Maximum wire loop resistance

500 Ω (total loop)

Output

Output

Output

Output

Output signal

4...20 mA, 20...4 mA or customized; temperature, resistance or voltage linear,

customized linearziation possible.

Span: 3.8...20.5 mA (measurement), 3.5...21.6 mA (failure)

Resolution: 5 μA

Update time

Approx. 1.5 seconds

Selectable dampening time

0 or 2 s (time constant)

NAMUR compliance

Current limitations and failure currents acc. to NAMUR NE 43

Configuration

Configuration

Configuration

Configuration

TempSoft

The PC configuration software, TempSoft, is a versatile and user-friendly tool for

transmitter configuration, loop check-up and sensor diagnostics.

It runs on Windows 2000, XP, Vista and Windows 7.

Approvals and certifications

CE

The device fulfils the statutory requirements of the EC directives.

The manufacturer certifies that these requirements have been met by applying the

CE marking.

Electromagnetic compatibility

According to EN 61326-1:2006

Ex approvals

Ex approvals

Ex approvals

Ex approvals

Non-Ex version

Without

ATEX

Intrinsically safe according to ATEX Directive 94/9/EC harmonized standards

In-head transmitter: EN 60079-0:2006, EN 60079-11:2007 and EN 60079-26:2007.

Rail-mount transmitter: EN 60079-0:2006, EN 60079-11:2007

Electromagnetic compatibility

Directive: 2004/108/EC

Harmonized standards according to EN 61326-1:2006

Vibration resistance

Acc. to IEC 60068-2-6; tested:

In-head: 10 g, 60...2000 Hz,

Rail: 5 g, 60...500 Hz

Shock resistance

Acc. to IEC 60068-2-31, tested for Drop and Topple, IEC 60068-2-31

NAMUR

Output limitations and fail currents according to NAMUR recommendations.

.book Page 40 Friday, November 9, 2012 3:50 PM