KROHNE OPTITEMP TT 30 C-R EN - Manual (Page 39)

TECHNICAL DATA
7
39
OPTITEMP TT 30 C/R
www.krohne.com 11/2012 - 4000753302 - MA OPTITEMP TT 30 C/R R02 en
Inputs / Outputs
Zero adjustment (all inputs) Any value within the range limits.
Input - RTD Input - RTD Input - RTD Input - RTD
Pt100 (IEC 60751, α = 0.00385) -200...+1000°C / -328...+1832°F (3- and 4-wire connection)
Pt100 (ASTM 1137-97,
α = 0.003902)
Pt100 (JIS C1604-1981,
α = 0.003916)
Pt1000 (IEC 60751, α = 0.00385)
-200...+200°C / -328...+392°F (3- and 4-wire connection)
D100 (Pt100 according to
JIS1604, α = 0.003916
-200...+1000°C / -328...+1832°F (3- and 4-wire connection)
PtX (10 ≤ X ≤ 1000)
(IEC 60751, α = 0.00385)
The upper range depends on the X value (3- and 4-wire connection), max. input
temperature corresponding to 2000 Ω.
Ni100 (DIN 43760) -60...+250°C / -76...+482°F (3- and 4-wire connection)
Ni120 (Edison No. 7)
Ni1000 (DIN 43760) -100...+150°C / -148...+302°F (3- and 4-wire connection)
Cu10 (Edison No. 15) -200...+260°C / -328...+500°F
Minimum span 10°C / 18°F (Pt100/1000, Ni100/1000)
Sensor current ca. 0.4 mA
Maximum sensor wire resistance 25 Ω / wire
Input - resistance / potentiometer Input - resistance / potentiometer Input - resistance / potentiometer Input - resistance / potentiometer
Range (resistance) 0...2000 Ω
Range (potentiometer) 0...2000 Ω (3- and 4-wire connection)
Minimum span 10 Ω
Sensor current ca. 0.4 mA
Customized linearization 9 points
Maximum sensor wire resistance 25 Ω / wire
Input - thermocouples Input - thermocouples Input - thermocouples Input - thermocouples
T/C type C - W5Re-W26Re -10...+2300°C / 14...+4172°F
T/C type B - Pt30Rh-Pt6Rh
(IEC 60584)
0...+1800°C / +32...+3272°F
T/C type E - NiCr-CuNi
(IEC 60584)
-200...+1000°C / -328...+1832°F
T/C type J - Fe-CuNi (IEC 60584) -200...+1000°C / -328...+1832°F
T/C type K - NiCr-NiAl
(IEC 60584)
-200...+1350°C / -328...+2462°F
T/C type L - Fe-CuNi (DIN 43710) -200...+900°C / -328...1652°F
T/C type N - NiCrSi-NiSiMg
(IEC 60584)
-270...+1300°C / -454...+2372°F
T/C type R - Pt13Rh-Pt
(IEC 60584)
-50...+1750°C / -58...+3182°F
T/C type S - Pt10Rh-Pt
(IEC 60584)
-50...+1750°C / -58...+3182°F
T/C type T - Cu-CuNi (IEC 60584) -200...+400°C / -328...+752°F
T/C type U - Cu-CuNi (DIN 43710) -200...+600°C / -328...+1112°F
Voltage -10...+500 mV
Minimum span 2 mV
.book Page 39 Friday, November 9, 2012 3:50 PM