KROHNE OPTITEMP TT 30 C-R EN - Manual (Page 28)

5
OPERATION
28
OPTITEMP TT 30 C/R
www.krohne.com 11/2012 - 4000753302 - MA OPTITEMP TT 30 C/R R02 en
• Start your PC and the software "TempSoft".
• Remove the cover from the terminal for the adapter cable (1).
• Connect the adaper cable with the PC configuration cable (2).
• Plug the connector of the adapter cable into the correct terminal (3).
• Plug the connector into the interface of the PC.
i The cable connection has been established, you can start the PC configuration of the
transmitter now.
• After configuration plug the cover on the terminal for the adapter cable again to prevent the
terminal from dirt.
• Start your PC and the software "TempSoft".
• Remove the plug from the female connector for the PC connection cable (1).
• Plug the male connector of the PC configuration cable into the female connector of the
transmitter (2).
PC connection of the in-head version
PC connection of the rail-mount version
.book Page 28 Friday, November 9, 2012 3:50 PM