KROHNE OPTITEMP TT 30 C-R EN - Manual (Page 17)

INSTALLATION
3
17
OPTITEMP TT 30 C/R
www.krohne.com 11/2012 - 4000753302 - MA OPTITEMP TT 30 C/R R02 en
1 Place the transmitter on the clamp as shown above.
2 Push the transmitter down until it reaches the plate and secure with a screw.
1 Hook one end of the clamp into the rail as shown above.
2 Push the other end of the the kit down until it snaps onto the rail.
3 Release by pushing the hook, shown in the picture, and at the same time lift the clip out of the
rail.
Step 1
Step 2
.book Page 17 Friday, November 9, 2012 3:50 PM