KROHNE OPTITEMP TT 10 C-R EN - Manual (Page 18)

3
INSTALLATION
18
OPTITEMP TT 10 C/R
www.krohne.com 02/2013 - 4000752703 - MA OPTITEMP TT 10 C/R R03 en
3.3 Rail mounting kit for in-head transmitters
DANGER!
To avoid fatal injuries, destruction or damage of the transmitter, always note the relevant
admonitions in the previous section if you install the in-head-transmitter on a rail!
INFORMATION!
The rail mounting kit allows to install the in-head transmitter on a rail according to EN 60715
TH35. The kit does not belong to the standard scope of delivery, you have to order it separately.
For more information refer to the section about the accessory parts in the chapter "Service".
Rail mounting kit for in-head transmitters
1 Rail (not included in the kit)
2 Screws
3 Clamp
4 Transmitter (not included in the kit)
Step 1
1 Place the transmitter on the clamp as shown above.
2 Push the transmitter down until it reaches the plate and secure with a screw.
.book Page 18 Tuesday, February 26, 2013 1:43 PM