KROHNE UFM 3030 Service EN - Manual (Page 7)

UFM 3030 7
1.4 Available versions
The UFM 3030 consists of a flow sensor (UFS 3000) and a signal converter (UFC 030), which can
be built into a compact flow meter, UFM 3030 K or a separate flow meter, UFM 3030 F.
Both flow sensor and signal converter are available with an approval for use in hazardous areas.
Special codes and regulations apply in these areas and are referred to in the instructions for
hazardous area versions, supplied as a separate manual.
UFS 3000 UFC 030 UFM 3030 K
1.5 CE Approvals
EMC, Electromagnetic Compatibility Directive
The product complies with the requirements of the harmonised standards under
the EMC directive 89/336/EEC.
Low Voltage Directive
The product complies with the requirements of the Low Voltage Directive
73/23/EEC and is designed in accordance with EN IEC 61010-1 first and second
edition. (safety requirements for electrical equipment for measurement, control
and laboratory use part 1)
Local safety regulations shall be observed in combination with the measures
special to this product to avoid dangerous situations.
Pressure Equipment Directive
The KROHNE organisation complies with the requirements of Module H of the
Pressure Equipment Directive 97/23/EC (full quality assurance).
Please refer to the CE declaration for more detailed information.