In-Situ Controller Radio & Board Replacement Kit User Manual

Instruction sheet, Controller radio and board replacement kit, Kit contents

Text mode
Original mode

Instruction Sheet

Controller Radio and Board Replacement Kit

Part Number 0094080

Kit Contents

Desiccant pack (0087630)

Radio (0075330)

Controller board (0098610 ver2012A)

It is important to install radio (0075330) only on controller board
(0098610 ver2012A) or later. Prior versions of the controller
board are not compatible with this radio.

Programming Module Purchased Separately

A programming module (0085410) is necessary for programming the radios with the
network settings.

Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.

0094082 | Rev. 001 | 05/2013

Table of contents

Document Outline

1 Kit Contents
2 Programming Module Purchased Separately
3 Radio Settings Definitions
4 Program Radio Network Settings
5 Determining Settings from a Known-Good Radio
6 Copy Guidelines
7 Install Desiccant Pack
8 Standard Radio Network Diagram
9 Radio Network Diagram Including a Repeater