In-Situ Aquaculture Buoy Manual (purchased before 28 May 2013) - Manual (Page 8)

8 Overview
FIGURE 1. Main components of the buoy
2.3 DEPLOYMENT CONSIDERATIONS
• Ensure that the DO sensor and brush are adequately submerged in
the pond (at least 2 feet deep), sufficiently away from the pond’s
edge or above the bottom of the pond.
• Do not carry the buoy by the conduit. Carry it by the float.
Otherwise you may damage the wiring.
• Anchor the buoy.
Solar panel
Transceiver
DO sensor, cleaning brush, and
cleanser dispenser
Battery box