In-Situ Aquaculture Buoy Manual (purchased before 28 May 2013) - Manual (Page 16)

16 Buoy Transceiver
4.4 RADIO DESCRIPTION
The buoy system uses a 900 MHz spread-spectrum radio
manufactured by Digi
®
International Inc. The configuration of these
radios is site-specific and usually involves setting the following
parameters:
• Hopping Channel
• Destination Address
• Address Mask
• Module VID
• Sleep Mode
Refer to the Radio Replacement Instruction Sheet at www.in-situ.com
for information on how to modify these parameters.
4.5 MAINTENANCE
Replace the desiccant pack within the box regularly to ensure
continued functioning of the tranceiver and the RDO sensor.