HT instruments HT157 - Manual (Page 56)

HT155 - HT157
EN - 54
8.4.5. RESULT MENU
This menu contains the controls which allow transferring the recorder data from the
instrument, analyzing the data and clearing all data from the instrument’s memory
Control Description
Read Results (CTRL+J)
Key
It allows downloading the instrument’s memory content onto
the PC. According to the type of analysis, the downloaded
data will appear in section “Measure Data” as TXT file and
will be shown both in graphical and in numerical format in the
working space. Defining the path where the file must be
saved is possible by using the “Setup” control (see § 8.4.1)
Realtime Analyze Command not active
Clear Results (CTRL+F)
It allows clearing the whole instrument’s memory content.
Before carrying out this operation, the program requires that
the instrument’s serial number is correctly put in
8.4.6. CALIBRATION
MENU
This menu contains the controls to manage the information relevant to the calibrations
performed on the instrument by using the portable calibrator HT151 (see § 6.1.3)
Control Description
Read Cal (CTRL+X)
Key
It allows saving on the PC the list of the calibrations
contained in the instrument’s memory in a file with extension
*.CAL
View Cal (CTRL+W)
Key
It allows opening a fine with extension *.CAL available in the
PC
Clear Cal (CTRL+V)
It allows deleting the whole list of calibrations available in the
instrument’s memory. Before carrying out this operation, the
program requires that the instrument’s serial number is
correctly put in
8.4.7. HELP
MENU
It provides information on the program’s version