HT instruments HT157 - Manual (Page 53)

HT155 - HT157
EN - 51
8.4. USE OF SOUNDVIEW SOFTWARE
After installing the software from the file “Setup.exe” contained in the USB pen drive
provided with the instrument, launch the program. The PC shows the following screen:
Fig. 53: Initial software screen
8.4.1. COPY AND PRINT COMMANDS
With a open measure shown to PC (command “Input Data” of File menu), perform a right
click on measure name the “Copy” and “Print” are available on program
Fig. 54: Use of Copy and Print commands
Copy
 A copy of graph and numerical data of current measure in a XLS file is performed
Print  The direct print of graph and numerical data of current measure is performed