Caution – HT instruments HT157 User Manual
Page 11
HT155 - HT157
EN - 9
4.6. CONFIGURATION
OF
MEASURING PARAMETERS
4.6.1. FOREWORD
Before activating a recording operation, it is necessary to set the necessary parameters
such as the measure name, the measuring time, etc., on the instrument, starting from
section “Setup” of the main menu (see Fig. 5) or pressing the “ ” key inside a measuring
section. The instrument will automatically save the values of the parameters each time it is
turned off, subsequently recalling them each time it is turned on.
CAUTION
It is not possible to access the “Setup” section while the instrument is
recording
Fig. 5: Selection of the instrument’s SETUP section
4.6.2. PROGRAMMING MENU INTERFACE
Select the “Setup” section in the main menu and confirm with “
”. The instrument
displays the screen shown in Fig. 6:
Line 1
Line 2
Line 3
Line 4
Line 5
Line 6
Line 7
Line 8
Fig. 6: Internal screen of programming menu
The single items can be selected by using the “ ” and “
” keys and pressing the “
” key
to modify the parameter values.
The following table contains the descriptions of the single lines contained in the
programming menu