HT instruments HT157 - Manual (Page 50)

HT155 - HT157
EN - 48
7.2. DATA TRANSFER ONTO USB PEN DRIVE
CAUTION
Transferring the data contained in the instrument’s memory onto an external
USB pen drive unit is guaranteed only when using the USB pen drive
provided with the instrument. This does not exclude, however, that
appropriately formatted USB pen drives can be used.
1. Select section “Data” in the main menu and confirm with “ ”, when entering the
instrument’s memory area (see Fig. 40)
2. Press the “ ” key. The instrument shows the message “Please insert Usb-Disk…..” on
the display
3. Insert the provided USB pen drive into the relevant USB port on the instrument, by
using the appropriate connection cable provided
4. After a few moments, the instrument checks the initialization of the connected pen drive
and verifies if the necessary space for a correct data transfer is available. In case of
insufficient memory space in the USB pen drive, the instrument shows a message on
the display.
5. After transfer is completed, the instrument shows the same screen as in section “Data”
(see Fig. 40)
6. In the USB pen drive, the instrument creates a subfolder in the main root with a name
equal to the date of transfer and, inside it, there are files with extension *.TXT with a
name consisting of the first 6 letters of the names of the files defined upon recording
plus two letters corresponding to the memory location where they were saved in the
instrument. These files contain the data of the performed recordings
7. Extract the USB pen drive and connect it to the PC for data display
8. Press “ ” to go back to the main menu of the instrument