HT instruments HT157 User Manual
Page 46
HT155 - HT157
EN - 44
7.1.3. RECALLING THE INTEGRATION MEASUREMENT DATA ON THE DISPLAY
1. Select a datum corresponding to the “INT” indication available in the list of saved
measures and press “
”. The instrument displays the following screen:
Line 1
Line 2
Line 3
Line 4
Lines 5-10
Fig. 46: Initial page display of "INT" analysis data
Line 1
This line shows the measure name defined in the programming menu
(see § 4.6)
Line 2
This line shows the date/time when measurement was started
Line 3
The type of “INT” measurement is shown
Line 4
This line shows the measuring range selected before starting measuring
Lines 5-10
These lines show the numerical values measured by the instrument
2. Press the “ ” key to access the final page. The instrument shows the following screen,
which also indicates the measuring time defined in the programming menu (see § 4.6)
Fig. 47: Final page display of "INT" analysis data
3. Press the “ ” key to go back to the previous screen or the “ ” key to go back to the initial
screen